Fluid Film Powerful Rust&Corrosion Protection
- IMPA 450702
- Contact Us
菲路特防锈/防腐/渗透/除湿/润滑喷剂
FLUID FILM Powerful Rust&Corrosion Protection
FLUID FILM is Essential for Farm Equipment Maintenance
The use of FLUID FILM in agriculture helps to extend maintenance schedules, resulting in significant cost savings and integrity of equipment. FLUID FILM's soft, active coating penetrates to the base metal, where it migrates to create a formidable, protective barrier that prohibits corrosion on a molecular level. Containing no solvents, FLUID FILM will not evaporate, providing lasting lubrication and powerful protection for equipment in use, in storage and in transit. FLUID FILM also protects equipment from atmospheric corrosion in storage facilities and metals exposed to animal waste.
FLUID FILM's woolwax formulation is classified as non-toxic and non-hazardous and will not burn greenery when used on cutting devices. In harsh climates or conditions, FLUID FILM will not freeze and retains a slick consistency, keeping chains and moving parts from binding or building up with dirt and debris. With a high flashpoint, exceptional water displacement and non-conductive characteristics, FLUID FILM is the perfect protectant for battery terminals and electrical connections. FLUID FILM also brings luster back to sun-baked coatings and helps prevent dirt and mud from caking on painted surfaces.
|
Typical Properties | |||||||
|
Appearance: |
|
Clear, straw colored liquid. | |||||
|
Viscosity: |
|
| |||||
|
Flash Point, Bulk Liquid: |
|
| |||||
|
Non-Volatile: |
|
89% minimum (3 hours @ | |||||
|
VOC. : |
|
Less than 1% | |||||
|
Specific Conductivity: |
|
Less than 10 -9 ohm/cm @ 1 mHz. | |||||
|
Specific Gravity: |
|
0.875 - 0.885 (less propellant). | |||||
|
Effect on Rubber: |
|
None on neoprene and buna-n. May cause swelling on non oil-resistant rubber goods. | |||||
|
Effect on Paint: |
|
None on most painted surfaces. | |||||
|
Effect on Aluminum: |
|
No pitting. | |||||
|
Extreme Pressure: |
|
Fail load - 15 pounds. | |||||
|
Wear Prevention — Characteristics: ASTM D-2266 Four Ball Method |
|
| |||||
|
Repaintability: |
|
Contain no silicones. It is recommended that surfaces treated with FLUID FILM® AS or NAS be hot water or steam detergent washed ( | |||||
|
Corrosion Protection: |
|
Passes 50 days. | |||||
|
ASTM D-1748: Humidity Cabinet |
|
Passes 30 days. | |||||
|
MIL-C-16173 Corrision Requirment |
|
Grade 2 -Soft Films. Meets & exceeds salt spray requirements. | |||||
|
Water Replacement: |
|
Displaces water from all metal surfaces (MIL-C-23411,Paragraph 3.6). | |||||
|
Toxicity: |
|
Non-toxic, LD-50 greater than 3 grams per kilogram. Non-irritating skin response. Very slight irritation to the eyes. (Toxicity tests performed according to standard methods by an independent laboratory). | |||||
|
Warning: |
|
AS: Extremely flammable. Contents under pressure. Do not puncture, incinerate or store above | |||||
|
Spray Nozzle Cleaning: |
|
Turn can upside down, point in a safe direction and spray until only propellant escapes. If spray button becomes clogged during use, pull it from the can and clean it with a fine wire or needle. Replace the button with a gentle twisting motion, keeping it pointed in a safe direction. Do not stick pins or other objects into nozzle tube. | |||||
