NCL DIESEL WATER TREATMENT

NCL DIESEL WATER TREATMENT

DESCRIPTION

NCL DIESEL WATER TREATMENT is a specially formulated with alkaline builders and sequestering agents. This combination of ingredients provides excellent corrosion protection for fresh water cooled diesel engines. It is designed to protect all internals of the cooling systems including piston jackets, pumps, coolers and piping. This new formula includes the most effective anti-scalants available.

USES

NCL DIESEL WATER TREATMENT was developed to provide a number of protective advantags:

1.  Conditions fresh water to prevent scale from being formed.

2.  Conditions metal to resist rust.

3.  Provides scale and rust protection when the  engine is in operation or shutdown.

4.  Holds scale forming minerals in suspension for complete and effective bleed-off   procedure

5.  Liquid for easy handling and complete mixing.

DOSAGE

Add initial dose of 6 litres of NCL DIESEL WATER TREATMENT to each 1,000 litres(1 1/2 US gallon per ton) of cooling water. Maintain 1500-2000ppm as sodium nitrite. For corrective treatment, see the following chart. The pH should be maintained from 8.5-9.5.

PRECAUTION: DANGER

Contains sodium nitrite. Harmful or fatal if swallowed. Avoid prolonged contact with skin-may cause irritation. Wear rubber gloves and goggles or face shield when handling this product and its solution. DO NOT MIX WITH ANYTHING BUT WATER.

SPECIFICATION

Form: A clear to very slight haze, pale yellow   liquid

Composition: A blend of nitrites, water conditioners and inhibitors(copper)Flash point: None C.O.C.

Weight: Approx. 1.2kg per litre or 10 lbs per

             US gallon

pH(100% solution): 12.0-12.5

pH(1% solution): 9.0-10.0

STORAGE

Store in cool place in original container. If contents are frozen, storage in warm place will restore fluid to its original state without adverse effect on working quality.

For more technical information, please contact  Magnus Representative.