UNITOR AQUATUFF HIGH FOAM
- IMPA 652 736991
- Contact Us
UNITOR AQUATUFF HIGH FOAM
优利多通用强碱清洁剂(高泡)
652 736991
General description
Aquatuff High Foam is a heavy duty alkaline cleaner with good foaming qualities specially formulated for cleaning cargo holds on bulk carriers and OBOs. The dense foam created prevents the cleaning solution from running off vertical surfaces and thereby enhances the cleaning efficiency. It is water based and is safe to the environment, containing only biodegradable ingredients. It effectively removes most dry cargoes to “water white standard”. Aquatuff High Foam is specially developed for cargo hold cleaning, but may also be used for other cleaning applications where Aquatuff normally is used but where high foam is beneficial.
Features
· Heavy Duty alkaline water based cleaner
· Specially formulated for the cleaning of cargo holds
· Does not contain nonyl phenol ethoxylates or other estrogenic compounds
· Biodegradable
· Free from hydrocarbon solvents
· Ideal for cleaning after coal, pet coke and other difficult cargoes
· Effective and economical in use
· Completely safe on epoxy coatings
Benefits
· Complies with all environmental regulations and the EU Detergent Regulation
This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
Cargo Hold Cleaning
Aquatuff High Foam is specially developed to clean vertical surfaces. When applied with the proper spray foam equipment, the dense foam created prolongs the contact time between the cleaning solution and the surface to be cleaned. It effectively removes most dry cargoes, sludge, soot, carbon deposits, fish meal etc., and is used for cargo hold cleaning when going from black to white cargo.
Aquatuff High Foam should not be used on zinc coatings - on zinc coatings use Aquabreak PX (Product no. 651 575613 and 651 575605).
Dosing method
1. Apply Aquatuff High Foam mixed 10–25% (ratio 1:9 to 1:3) in water, using spray foam equipment.
2. Leave for 30–45 minutes. The surface remains wet.
3. Wash down with a high pressure unit. For best results, direct the high pressure jet at the lowest parts of the hold first and work upwards.
4. Repeat the procedure if necessary.
If Unitor Slip-Coat (Product no. 652 737015 and 652 737023) is applied to the cargo hold surfaces prior to loading, the concentration of Aquatuff High Foam in the cleaning solution may be reduced.
When mixing Aquatuff High Foam with water the following needs to be taken into account:
1. Seawater may reduce the foaming qualities of the detergent
2. Seawater may influence the pH of the cleaning solution with a reduced cleaning effect as result
3. Seawater represents a corrosion risk to the surfaces and the equipment used
When mixing Aquatuff High Foam with seawater it is recommend to have a concentration of at least 20% Aquatuff High Foam with a recommended mixture of 25%.
Form
Liquid
Appearance
Density
1,1
pH, in conc.
13
Non Compatible
The concentrated product may react with aluminium, zinc, tin and their alloys.
More MSDS