UNITOR COLDWASH HD

UNITOR COLDWASH HD

优利多万能去油剂和货舱清洁剂

651 571430

Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and surfactants.

Directions for use

This product is excellent for use on soiled surfaces, bilges and machinery parts.

This degreaser can be applied neat with a brush, by hand spray, immersion, soaking etc. The contact- or soaking time should be between 15 minutes to 2 hours before washing off with hot or cold water. Hot water will improve the result of the cleaning.

Spot cleaning
Coldwash HD can be sprayed neat onto surfaces to be cleaned. The contact time should be at least 30 minutes or up to 2 hours if time allows. Bulkheads/walls can be washed down by use of high pressure cleaning machines. The best result is achieved with hot water between 60 to 80°C.

Spray method
Spray Coldwash HD neat onto soiled surfaces. The contact time should be between 15-30 minutes, and then wash off with water. To clean stubborn deposits, mechanical agitation such as scrubbing will improve the cleaning.

Soak method
Immerse the parts to be cleaned into a bath of neat Coldwash HD for 30 minutes, and then wash off with water.

Circulation method
Cleaning of equipment such as lube oil heat exchangers, fuel oil preheaters and filters can be accomplished by circulating neat Coldwash HD.

Dosing method

Ordering information

Supplied with

Dosage and control

Sampling and testing

Features

Documentation and literature Customer benefits

MSDS